IOmeter set of tests
- Guidance
- April 30, 2015
- Download as PDF
Test specifications and configuration
Below is the list of the basic test and its configuration and its specification:
- RAID array on node 1
- RAID array on node 2
- StarWind RAM disk that is running on node1 through the SyncChannel (node2 should be client machine)
- StarWind RAM disk that is running on node2 through the SyncChannel (node1 should be client machine)
- StarWind RAM disk that is running on node1 through the loopback
- StarWind RAM disk that is running on node2 through the loopback
- Basic Image target that is running on node1 through the SyncChannel (node2 should be client machine)
- Basic Image target that is running on node2 through the SyncChannel (node1 should be client machine)
- Basic Image without cache configured that is running on node1 through the loopback
- Basic Image without cache configured that is running on node2 through the loopback
- HA device without cache configured (you should run in from the VM as you previously did)
Every test may have following configurations:
- 4K 100% read, 100% sequential, # of Outstanding IOPS= 16
- 4K 100% write, 100% sequential, # of Outstanding IOPS=16
- 64K 100% read, 100% sequential, # of Outstanding IOPS= 16
- 64K 100% write, 100% sequential, # of Outstanding IOPS= 16
