Posted by Michael Rakitin on September 30, 2019
Fixing reset to device error when running the LSI_SAS controller

This article provides steps that need to be performed in order to fix reset to device error when running the LSI_SAS controller.
Learn More

Posted by Boris Yurchenko on January 23, 2019
How to collect logs with StarWind Log Collector

This article provides guidance on the steps to make when using StarWind Log Collector.
Learn More

Posted by Boris Yurchenko on July 25, 2018
Bringing your tape library back online in MS DPM with tape drive remap

This article provides a guidance on fixing the issue with Microsoft System Center Data Protection Manager (DPM) when a tape library goes offline and gets separated into standalone drives.
Learn More

Posted by Michael Rakitin on February 1, 2018
StarWind Targets and Linux Open iSCSI Initiator

This article describes how to solve “mounting issue” of StarWind devices in Linux Open iSCSI Initiator for VTL, Physical Tapes, RAW images.
Learn More

Posted by Michael Rakitin on June 7, 2017
Fix for iSCSI targets going to reconnecting state after installation of Windows KB4015550, KB4015553, KB4019215, KB4019217, KB4022715, KB4022726 or KB4025336

This article provides solution to the problem with iSCSI targets getting into reconnecting state after installation of Windows updates.
Learn More

Posted by Oles Borys on September 8, 2015
V2V Converter Kernel Panic

This article provides a solution to “kernel panic – not syncing: attempted to kill init!” error while botting a CentOS VM after V2V conversion to any non CentOS hypervisor using StarWind or any other V2V Converter.
Learn More

Posted by Oles Borys on June 17, 2015
Why enabling Jumbo Frames (MTU) on switch is so important

This article provides an explanation on why it is so important to enable Jumbo Frames (MTU) on switch and tells about possible issues that may happen otherwise.
Learn More

Posted by vitaliy kapshytar on June 3, 2015
How to avoid delays on HA storage during RAID malfunction

This article provides an explanation how RAID issues may affect StarWind Virtual SAN and provides viable workarounds.

Learn More

Posted by vitaliy kapshytar on May 28, 2015
Add device/Add device (advanced) wizard does not see volumes (partitions).

This article provides a step by step workaround for Add device/Add device (advanced) wizard issue.
Learn More

Posted by vitaliy kapshytar on May 18, 2015
HA in Not Active state after upgrading from version 6 to version 8 (StarWind Virtual SAN)

This article provides the guidance for the situation when upgrading StarWind version 6 to StarWind Virtual SAN (version 8) resulted in HA device changing its state to Non-Active, which makes the StarWind storage to go offline
Learn More